You are here: Support Web>HDG229>HDA229

HDA229

HDA229

This evaluation kit is intented to give you a fast way to test the HDG229.

Please refer to our getting started guide to quickly bring the board up and running. If you have any questions, check out the FAQ and if the answer you are looking for is not there, send us an email at support@hd-wireless.se.

SDIO speed

The evaluation board SDIO bus is setup to use 3.3V to operate, for this reason the maximum theorical throughput it can perform over the bus is 200Mbits/s even thought the module itself support SDIO 3.0. Please refer to this page for the full table of SDIO speeds.
This site is powered by Foswiki
Copyright © 2017-2019 H&D Wireless AB.